Because Quality Matters
Strong cleaning and disinfection performance yet suitable for the use on most materials
- Broad effective spectrum
- Strong cleaning power
- Integrated protection against corrosion
Use
For the instrument disinfection use an aqueous solution and dosage as required. To measure the correct dosage, use lid as a measuring cup. Add liquid concentrate to the cup until liquid reaches desired scale ml unit (20 ml lower scale, 40 ml upper scale). Immerse instruments completely. Keep instruments disjointed. Important: The air must have vacated all cavities. Follow exposure times. After disinfection, rinse instruments thoroughly with water. Renew bath solution two or three times weekly depending on the degree of contamination. A daily bath change is recommended. Do not use on aluminum alloys and tempers such as Citoject syringes.
Scope & Application
- For the manual disinfection and cleaning of medical instruments, burs and all endodontic instruments
- Scalpels, stomatoscopes, forceps, spoons, clamps, scalars, micro-instruments, spatulas, files, curettes, and probes
- OROCID-MULTISEPT® Plus can also be used in an ultrasound cleaning bath
Effective spectrum / Exposure times
| Bactericide (1) | 0.25% in 15 min |
| Fungicide (1) | 0.25% in 15 min. |
| MRSA (2) | 0.25% in 15 min. |
| Tuberculocide (1) | 2% in 1 hour |
| 4% in 30 min. | |
| 5% in 15 min. | |
| HepatitisB/HIV(3) | 2% in 1 hour |
| 4% in 15 min. | |
| Hepatitis C (4) | 0.5% in 5 min. |
| Coronavirus (5) | 0.25% in 15 min. |
| 0.5% in 5 min. | |
| Adenovirus | 2% in 1 hour |
Complies with DGHM Standard Methods and EN 1040, EN 1275 (C. albicans); DGHM / VAH listed
Dosing
 |  |  | |
Material Compatibility
| Polyethylene | compatible | |
| PTFE | compatible | |
| Polypropylene | compatible | |
| Silicon-rubber | compatible | |
| Cast-iron | compatible | |
| Steel instruments | compatible | |
| Steel instruments | compatible | |
| Acrylic glass | compatible |
Frequently Asked Questions
- Should I clean the instruments before or after disinfection with OROCID-MULTISEPT® Plus?
Disinfect before cleaning. Since OROCID-MULTISEPT® Plus is free of aldehydes and phenols, there is not fixation of blood and proteins on instruments. In addition, OROCID-MULTISEPT® Plus comes in a unique combination of diverse tensides and supportive substances, and has strong cleaning power which makes subsequent manual cleaning easier or even redundant. Hard-to-remove residue such as cast or cement can very easily be removed using ULTRACLEAN-3 in an ultrasonic cleaner. - What exactly is a 2% solution?
A 2% solution means 20 ml of concentrate and 980 ml of water. The total ready-to-use solution has to be equal to 1 liter. - How frequently should I change the solution?
Depending on the organic contamination, change the solution 2-3 times per week. However, a daily change is recommended. - Can I use OROCID-MULTISEPT® Plus in the ultrasonic device?
Yes. OROCID-MULTISEPT® Plus is also suitable for use in the ultrasonic device.
Composition in 100 g
9.8 g Alkylamine, 4.2 g Dialkylmethylpoly-(oxyethyl)ammonium propionate, Cleaning booster, Auxiliaries.
Physical properties
Color: Clear, blue liquidOdour: Aromatic
Shelf life: 48 months
pH-Value: Concentrate: 12.5 2% Solution: 11.0
Precautions
R34 Causes burns. S2 Keep out of the reach of children. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 After contact with skin, wash immediately with plenty of water. S37/39 Wear suitable gloves and eye/face protection. S46 If swallowed, seek medical advice immediately and show this container or label. For further information see safety data sheet.
Delivery Forms
