Because Quality Matters
Gentle disinfection of floors. Suitable for acrylic glass
- Excellent material compatibility
- Strong cleaning power
- Fruity fragrance
In accordance with the Biocidal Products Directive: OROLIN® OP-Forte AF is a liquid concentrate for the wipe and mop disinfection and cleaning of floors made of natural stone, floor slabs, PVC, walls, sanitary facilities, glazed tiles, lab benches, and other large surfaces. Its mild formulation makes OROLIN® OP-Forte safe for the use on acrylic glass and untreated wood.
Use
For the wipe disinfection, use an aqueous solution and dosage as required. To measure the correct dosage, use lid as a measuring cup. Add liquid concentrate to the cup until liquid reaches desired scale ml unit (20ml lower scale, 40ml upper scale). Completely moisten surfaces to be disinfected. 1m² requires 20-40ml ready-to-use disinfection solution.
Scope & Application
- For the wipe or mop disinfection of washable surfaces on medical devices, medical infrastructure and appliances
- Suitable for floors made of natural stone, floor slabs, PVC, walls, sanitary devices, tiles, and laboratory benches
Effective spectrum / Exposure times
| Bactericide | 0.75% in 4 hours |
| 1% in 1 hour | |
| 2% in 15 min. | |
| Fungicide | 0.75% in 4 hours |
| 1% in 1 hour | |
| 2% in 15 min. | |
| Fungi (on untreated wood) | 1.5% in 4 hours |
| 2% in 1 hour | |
| HepatitisB/HIV(1) | 5% in 1 min. |
| Influenza A Virus | 0.75% in 15 min. |
Complies with European Standards and AFNOR NF T 72150*, NF T 72170*, NF T 72200 (*Spectrum 4); DGHM / VAH listed
Dosing
 |  |  | |
Material Compatibility
| Polyethylene | compatible | |
| PTFE | compatible | |
| Polypropylene | compatible | |
| Acrylic glass | compatible | |
| Aluminum | compatible | |
| Aluminum at elevated temperatures | compatible |
Frequently Asked Questions
- What is the difference between OROLIN® OP-Forte AF and ISORAPID® Floor?
Both products are designed to clean and disinfect large water-resistant surfaces including floors and sanitary equipment. ISORAPID® Floor acts more quickly while OROLIN® OP-Forte AF is milder and specifically designed to be used on sensitive surfaces including raw wood and acrylic glass. - How much solution of OROLIN® OP-Forte AF should I use?
1 m2 requires 20-40 ml of ready-made disinfecting solution. 1 liter of solution is enough for 50 m2. - Is OROLIN® OP-Forte AF suitable for all floors?
Thanks to its mild formula devoid of aldehydes, phenols or potassium, OROLIN® OP-Forte AF is a highly compatible disinfectant. It is suitable for use on a wide range of surfaces including natural stone, plates, PVC, untreated wood, and acrylic glass. Be sure to test before use on sensitive materials by applying to a small inconspicuous area. - Do I have to wipe off any excess liquid after using OROLIN® OP-Forte AF?
The ready-made solution of OROLIN® OP-Forte AF does not leave any residue and rinsing is therefore redundant.
Composition in 100 g
10 g Quaternary ammonium compounds, Perfumes, Dyestuff.Physical properties
Color: Clear, green liquidOdour: Aromatic
Shelf life: 36 months
pH-Value: 1% solution: 7.0
Precautions
R36/38 Irritating to eyes and skin. S2 Keep out of the reach of children. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 After contact with skin, wash immediately with plenty of water. S37/39 Wear suitable gloves and eye/face protection. For further information see safety data sheet. Use disinfectants safely. Always read label and product information before use.
Delivery Forms
