Because Quality Matters
Highly efficient concentrate with unpre- cedented material compatibility
- Works within two minutes
- Maintains the form stability of dental impressions
- 1l of concentrate produces 50l of working solution
Use
For the disinfection of impression material, use a aqueous solution and dosage as required. To measure the correct dosage, use lid as a measuring cup. Add liquid concentrate to the cup until liquid reaches desired scale ml unit (20 ml lower scale, 40 ml upper scale). Ensure any air sockets have vacated all cavities and follow exposure times as indicated. Do not exceed exposure times. After disinfection, rinse dental impressions thoroughly with water. A daily bath change is recommended depending on the degree of contamination. Only partly suitable for aluminum.
Scope & Application
- For the disinfection and cleaning of dental impressions
- Suitable for alginate, polyether, polysulfide, A silicone, and K silicon, as well as for impression trays, wax-bites, orthodontic appliances, dental lab instruments, and prosthetic materials
Effective spectrum / Exposure times
| Bactericide (1) | 0.5% in 10 min. |
| 2% in 2 min. | |
| Fungicide (1) | 0.5% in 10 min. |
| 2% in 2 min. | |
| MRSA (2) | 0.5% in 10 min. |
| 2% in 2 min. | |
| Limited virucide (incl. HBV, HIV) | 0.5% in 5 min. |
| 1% in 1 min. | |
| Hepatitis C (3) | 0.5% in 1 min. |
| Vaccinia virus | 0.5% in 5 min. |
| 1% in 1 min. |
Complies with DGHM Standard Methods, EN 1040, EN 1275 (C. albicans) and RKI / DVV guidelines; DGHM / VAH listed
Dosing
 |  |  | |
Material Compatibility
| Polyethylene | compatible | |
| PTFE | compatible | |
| Polypropylene | compatible | |
| Polyether (impression material) | compatible | |
| Polysulfide (impression material) | compatible | |
| Alginate (impression material) | compatible | |
| Silicone (impression material) | compatible |
Frequently Asked Questions
- Should I disinfect impressions and dental forms before sending them to the dental technician?
Yes. Forms and dental pieces are to be considered as microbially contaminated. They may only leave the dental practice after careful cleaning and disinfection with a suitable product to avoid any disinfection risks during handling. - Should I pre-clean the impressions before the disinfection with ASEPTOPRINT® Liquid?
No. Because of the excellent cleaning properties of ASEPTOPRINT® Liquid pre-cleaning is redundant. In addition, ASEPTOPRINT® Liquid is aldehyde-free and will prevent a fixation of blood und proteins on impression materials. - Can I spray ASEPTOPRINT® Liquid directly onto the impressions?
No. ASEPTOPRINT® Liquid is a concentrate that should be diluted as a 2% solution. The product is abundant. 1 liter of concentrate will produce 50 liters of ready-to-use solution. - How frequently should I change the solution?
Depending on the organic contamination, change the solution 2-3 times per week. However, a daily change is recommended.
Composition in 100 g
7.7 g Alkylamine, 22.5 g Benzalkonium chloride, Surfactants, Cleaning booster, Auxiliaries.Physical properties
Color: Clear, yellow liquidOdour: Aromatic
Shelf life 36 months
pH-Value: Concentrate: 12.6 2% Solution: 10.7
Precautions
R22 Harmful if swallowed. R34 Causes burns. S2 Keep out of the reach of children. S26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 After contact with skin, wash immediately with plenty of water. S37/39 Wear suitable gloves and eye/face protection. S46 If swallowed, seek medical advice immediately and show this container or label. For further information see safety data sheet.
Delivery Forms
